 |
UP-5K
Uptek
air cooling
＞25,000hours
300,000dots/min
320*400*150mm
2 years
AC 110V/220V±10%
Description of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
2D/3D Photo Crystal Laser Inner Engraving Machine is used for engraving 2D or 3D design inside of crystal, acrylic, glass and other transparent hard materials. It doesn't break the surfact of materials during engraving, it's products can give you crystal-clear and fine and noble visual.
2D/3D Photo Crystal Laser Inner Engraving Machine can engrave 2D/3D portrait, animal, plant, building, car, boat, airplanes, words, trophies, etc. It is widely used in the fine model engraving processing, gift shops, craft shops, photo printing shops, wedding photography shops, etc.
Our 2D/3D Photo Crystal Laser Inner Engraving Machine adopts the most advanced laser engraving technology and industrial design, which has fastest engraving speed, good beam quality, stable working performance and fine engraving effect. It can engrave one big block of crystal or several small blocks at the same time.
Advantages of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
The 2D 3D Photo Crystal Laser Inner Engraving Machine can engrave both 2D and 3D (depends on your design).
Simple operation: User-friendly control software, which is easy to learn and use. Automatic center function is convenient for placing crystal.
High engraving speed: The 2D 3D Photo Crystal Laser Inner Engraving Machine adopts high-speed laser scanning galvanometer and 5000Hz Laser source. Engraving speed can up to 300000 dots/min, save working time.
Equipped with shockproof system: prevent the demage on core components effectively during transportation.
Big engraving size: The 2D 3D Photo Crystal Laser Inner Engraving Machine is also good for big engraving size, as big as 320*400*150mm. It is suitable for engraving family, friends, etc.
Environmental protection and low noise: No compressor pumps, no high power fan and no pollution.
Maintenance free: The 2D 3D Photo Crystal Laser Inner Engraving Machine adopts diode laser source, long life time, don't need to change lamp like machine with YAG Xenon lamp.
High stability engraving effect delicate: Adopting advanced semiconductor side pumped solid state laser technology.
Parameters of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
| Product | 2D 3D Photo Crystal Laser Inner Engraving Machine |
| Model | UP-5K |
| Working area | 320mm x 400mm x 150mm |
| Laser source | semiconductor diode |
Laser frequence | 5000Hz |
| Laser wavelength | 532nm |
Maximum marking speed | 300,000dots/min(the fastest speed in Chinese market) |
Resolution | 1200DPI |
Repositioning accuracy | 10μm |
Cooling way | air cooling |
Life time of Semiconductor diode | ＞25,000hours |
File format | JPG, BMP, DWG, DXF etc. |
| Votalge | AC 220V/280V±10%, 50Hz/60Hz |
| Total power | ＜500W |
| Working environment | temperature 10-35°C, humidty 10%-85% no dust and no corrosion |
| Applicable materials | Crystal, glass acrylic and other transparent hard materials |
Samples of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
Packaging & Shipping of 2D 3D Photo Crystal Laser Inner Engraving Machine
Our Service
Two years warranty for the 2D 3D Photo Crystal Laser Inner Engraving Machine.
24 hours online service.
User-friendly user manuals and training videos are available.
CE, FDA and ISO 9001 certificates for D 3D Photo Crystal Laser Inner Engraving Machine.
Three times quality inspection before shipment to ensure high quality and stable performance.
Strong packaging to avoid the damage of the 3D Photo Crystal Laser Inner Engraving Machine during shippment.
Help customers to clear customs, and provide all documents for customs clearance.
Certificates
Description of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
2D/3D Photo Crystal Laser Inner Engraving Machine is used for engraving 2D or 3D design inside of crystal, acrylic, glass and other transparent hard materials. It doesn't break the surfact of materials during engraving, it's products can give you crystal-clear and fine and noble visual.
2D/3D Photo Crystal Laser Inner Engraving Machine can engrave 2D/3D portrait, animal, plant, building, car, boat, airplanes, words, trophies, etc. It is widely used in the fine model engraving processing, gift shops, craft shops, photo printing shops, wedding photography shops, etc.
Our 2D/3D Photo Crystal Laser Inner Engraving Machine adopts the most advanced laser engraving technology and industrial design, which has fastest engraving speed, good beam quality, stable working performance and fine engraving effect. It can engrave one big block of crystal or several small blocks at the same time.
Advantages of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
The 2D 3D Photo Crystal Laser Inner Engraving Machine can engrave both 2D and 3D (depends on your design).
Simple operation: User-friendly control software, which is easy to learn and use. Automatic center function is convenient for placing crystal.
High engraving speed: The 2D 3D Photo Crystal Laser Inner Engraving Machine adopts high-speed laser scanning galvanometer and 5000Hz Laser source. Engraving speed can up to 300000 dots/min, save working time.
Equipped with shockproof system: prevent the demage on core components effectively during transportation.
Big engraving size: The 2D 3D Photo Crystal Laser Inner Engraving Machine is also good for big engraving size, as big as 320*400*150mm. It is suitable for engraving family, friends, etc.
Environmental protection and low noise: No compressor pumps, no high power fan and no pollution.
Maintenance free: The 2D 3D Photo Crystal Laser Inner Engraving Machine adopts diode laser source, long life time, don't need to change lamp like machine with YAG Xenon lamp.
High stability engraving effect delicate: Adopting advanced semiconductor side pumped solid state laser technology.
Parameters of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
| Product | 2D 3D Photo Crystal Laser Inner Engraving Machine |
| Model | UP-5K |
| Working area | 320mm x 400mm x 150mm |
| Laser source | semiconductor diode |
Laser frequence | 5000Hz |
| Laser wavelength | 532nm |
Maximum marking speed | 300,000dots/min(the fastest speed in Chinese market) |
Resolution | 1200DPI |
Repositioning accuracy | 10μm |
Cooling way | air cooling |
Life time of Semiconductor diode | ＞25,000hours |
File format | JPG, BMP, DWG, DXF etc. |
| Votalge | AC 220V/280V±10%, 50Hz/60Hz |
| Total power | ＜500W |
| Working environment | temperature 10-35°C, humidty 10%-85% no dust and no corrosion |
| Applicable materials | Crystal, glass acrylic and other transparent hard materials |
Samples of Uptek 2D 3D Photo Crystal Laser Inner Engraving Machine
Packaging & Shipping of 2D 3D Photo Crystal Laser Inner Engraving Machine
Our Service
Two years warranty for the 2D 3D Photo Crystal Laser Inner Engraving Machine.
24 hours online service.
User-friendly user manuals and training videos are available.
CE, FDA and ISO 9001 certificates for D 3D Photo Crystal Laser Inner Engraving Machine.
Three times quality inspection before shipment to ensure high quality and stable performance.
Strong packaging to avoid the damage of the 3D Photo Crystal Laser Inner Engraving Machine during shippment.
Help customers to clear customs, and provide all documents for customs clearance.
Certificates
